PRODUCTS SEARCH

NOTE- IQSE-W1 - WiFi data trasmission - Note: no Blipper - to be matched with specific harness (sold separately) - including sensor - if harness is not indicated, contact us

NOTE- QSX-F2l - to be matched with QSE module

NOTE- (F21036) - use HT-GIPRO-M to fit on handlebar

NOTE- BMW R 1200 ABS Euro 3 with LED tailight

NOTEESE-BM1 - use two units on S 1000 RR '15-'18 and on R18 '21-'25 - eliminates error messages in CPU when removing exhaust valve

NOTEuse with HT-ESE-BM1 on S1000RR '15-'18 and R18 '21-'25 - BMW motorcycle switchable exhaust servo eliminator (see applications for suitable models)

NOTE- 300x190mm - attachment spoiler - fitting kit with or without drilling included

NOTE- 300x220mm - attachment spoiler - fitting kit with or without drilling included

NOTE- 300x180mm - attachment spoiler - fitting kit with or without drilling included

NOTE- attachment spoiler - 260 mm x 100 mm - fitting kit XCC (code MR4025066125074) is included to avoid drilling original screen

NOTE- attachment spoiler; 360x150 mm - use kit XCC to avoid drilling original screen (code MR4025066125074) - Test Template in Manuals section

NOTE- 600mm - thickness 4mm - as OEM

NOTE500mm - these screens are lower than the original

NOTE- 500mm - these screens are lower than the original

NOTEmm 600 x 600 - thickness 5mm

NOTE- "Cone" type - including screw and including mounting hardware for almost all handlebars from 12mm to 22mm inside diameter. - do not use on H-D or Kawasaki handlebars with M8 thread

NOTE- "IP" type - including screw and including mounting hardware for almost all handlebars from 12mm to 22mm inside diameter. - do not use on H-D or Kawasaki handlebars with M8 thread

NOTE- pair - FOR PILLION RIDER ONLY - eccentric adjustment on stock - +30/+40mm - on BMW R 1200RT: use with GTRGK-DS01-S - to be used only with Gilles Tooling footrests

NOTE- pair - eccentric adjustment 20mm - for rider or pillion - BMW R 1200RT: use GTRGK-DS01-S on passenger - to be used only with Gilles Tooling footrests