PRODUCTS SEARCH

NOTE- (F21036) - use HT-GIPRO-M to fit on handlebar

NOTE- use on BMWS motorcycles with LED 2 wire taillight

NOTE- 340x260mm (+70mm over OEM) - double bubble

NOTE- as OEM

NOTE- (double bubble)

NOTE- (double bubble)

NOTE- Made from 3mm acrylic - Supplied with 3M™ Dual Lock™ fixings - not street legal - while riding use ONLY if clear, light tint or yellow

NOTE- "Cone" type - including screw and including mounting hardware for almost all handlebars from 12mm to 22mm inside diameter. - do not use on H-D or Kawasaki handlebars with M8 thread

NOTE- "IP" type - including screw and including mounting hardware for almost all handlebars from 12mm to 22mm inside diameter. - do not use on H-D or Kawasaki handlebars with M8 thread

NOTE- more info on www.probolt-italy.com

NOTE- 4 bolts + wellnuts - choose colour - more info on www.probolt-italy.com

NOTE- 6 nuts M10x1.25x10mm - drilled for safety wire - choose colour

NOTE- M10x1.25x10mm - per unit - drilled for safety wire - choose colour

NOTE2 screw holes

NOTE- Clutch and rear brake master cylinder cover

NOTE- more info on www.probolt-italy.com

NOTEM10x(1.25mm)x55mm - more info on www.probolt-italy.com

NOTEmore info on www.probolt-italy.com - Warning: coloured finish on titanium could take longer to deliver if not readily available