PRODUCTS SEARCH

NOTE- race only - more details in catalogue (see section)

NOTE- EC approved - may need header or link pipe - check catalogue

NOTE- EC approved - may need header or link pipe - check catalogue

NOTE- Made from 3mm acrylic - Supplied with 3M™ Dual Lock™ fixings - not street legal - while riding use ONLY if clear, light tint or yellow

NOTE- pair - only available in matt black

NOTE- aluminium - powder coating - 3mm thickness

NOTE- aluminium - 4mm thickness

NOTE- diam 28.4mm - can be matched to riser 1DGT and 2DGT - aluminium

NOTE- "Cone" type - including screw and including mounting hardware for almost all handlebars from 12mm to 22mm inside diameter. - do not use on H-D or Kawasaki handlebars with M8 thread

NOTE- "IP" type - including screw and including mounting hardware for almost all handlebars from 12mm to 22mm inside diameter. - do not use on H-D or Kawasaki handlebars with M8 thread

NOTE- choose colour

NOTE- screen and tank cap bolts not included

NOTE- 6 bolts + wellnuts - choose colour - more info on www.probolt-italy.com

NOTE- more info on www.probolt-italy.com

NOTE- more info on www.probolt-italy.com

NOTE- screen and tank cap bolts not included

NOTE- 6 bolts + wellnuts - more info on www.probolt-italy.com

NOTE- 4 bolts M8 x (1.25mm) x 30mm - more info on www.probolt-italy.com

NOTE- diam. 16mm, thread 1.50 more info on www.probolt-italy.com - Warning: coloured finish on titanium could take longer to deliver if not readily available