PRODUCTS SEARCH

NOTE- EC approved - to be used with header or link pipe - check catalogue

NOTE- EC approved - to be used with header or link pipe - check catalogue

NOTE- diam 28.4mm - can be matched to riser 1DGT and 2DGT - aluminium

NOTE- "Cone" type - including screw and including mounting hardware for almost all handlebars from 12mm to 22mm inside diameter. - do not use on H-D or Kawasaki handlebars with M8 thread

NOTE- "IP" type - including screw and including mounting hardware for almost all handlebars from 12mm to 22mm inside diameter. - do not use on H-D or Kawasaki handlebars with M8 thread

NOTE- choose colour

NOTE- etched - choose colour

NOTEM22 (1.00mm) - open nut - choose colour

NOTE- more info on www.probolt-italy.com

NOTEM6x1 - dimensions (bolt/threaded part not included): height 30mm, max diameter 30mm - more info on www.probolt-italy.com

NOTE- more info on www.probolt-italy.com

NOTE- more info on www.probolt-italy.com

NOTE- more info on www.probolt-italy.com

NOTE- more info on www.probolt-italy.com

NOTEM10x(1.25mm)x55mm - drilled head bolts - more info on www.probolt-italy.com

NOTEM10x(1.25mm)x55mm - more info on www.probolt-italy.com

NOTEmore info on www.probolt-italy.com - Warning: coloured finish on titanium could take longer to deliver if not readily available

NOTEmore info on www.probolt-italy.com - Warning: coloured finish on titanium could take longer to deliver if not readily available

NOTEmore info on www.probolt-italy.com - Warning: coloured finish on titanium could take longer to deliver if not readily available

NOTEFlanged Hex Head more info on www.probolt-italy.com - Warning: coloured finish on titanium could take longer to deliver if not readily available