PRODUCTS SEARCH

NOTE- EC approved - to be used with header or link pipe - check catalogue

NOTE- EC approved - to be used with header or link pipe - check catalogue

NOTE- EC approved - to be used with header or link pipe - check catalogue

NOTE- EC approved - to be used with header or link pipe - check catalogue

NOTE- 340x260mm (+70mm over OEM) - double bubble

NOTE- as OEM

NOTE- (double bubble)

NOTE- (double bubble)

NOTE- Made from 3mm acrylic - Supplied with 3M™ Dual Lock™ fixings - not street legal - while riding use ONLY if clear, light tint or yellow

NOTE- "Cone" type - including screw and including mounting hardware for almost all handlebars from 12mm to 22mm inside diameter. - do not use on H-D or Kawasaki handlebars with M8 thread

NOTE- "IP" type - including screw and including mounting hardware for almost all handlebars from 12mm to 22mm inside diameter. - do not use on H-D or Kawasaki handlebars with M8 thread

NOTE- more info on www.probolt-italy.com

NOTE- 4 bolts + wellnuts - choose colour - more info on www.probolt-italy.com

NOTE- 6 nuts M10x1.25x10mm - drilled for safety wire - choose colour

NOTE- M10x1.25x10mm - per unit - drilled for safety wire - choose colour

NOTE- 10mm thread, length 30mm - choose colour

NOTEM6x1 - dimensions (bolt/threaded part not included): height 30mm, max diameter 30mm - more info on www.probolt-italy.com

NOTE2 screw holes

NOTE- Clutch and rear brake master cylinder cover

NOTE- more info on www.probolt-italy.com